Lamri, Isam EddineMansoul, AliNakmouche, Mohammed FaroukBelattar, Mounir2023-06-162023-06-162021978-1-6654-2816-3https://doi.org/10.1109/ICRAMET53537.2021.9650462https://hdl.handle.net/20.500.14365/195010th International Conference on Radar, Antenna, Microwave, Electronics, and Telecommunications (ICRAMET) -- NOV 23-24, 2021 -- ELECTR NETWORKThe aim of this paper is the development of a 2x2 MIMO antenna that is capable of covering the whole UWB spectrum of 3.1 - 10.6 GHz. The design starts by implementing a single element of Printed Circular Disc Monopole (PCDM) antenna on a 1.6 mm thick FR-4 substrate having a relative permittivity of 4.4. A parametric analysis, as well as slots insertion, are performed based on Finite Difference Time Domain Analysis (FDTD) to improve the structure performance related to the operating bandwidth. Concerning the MIMO antenna structure, a four-element configuration is investigated. Over the intended frequency band, the isolation is greater than 15 dB. The Envelope Correlation Coefficient (ECC), Diversity Gain (DG), and Channel Capacity Loss (CCL) have all been shown to improve diversity performance and are determined to be within acceptable limits. A network analyzer is used to measure the antenna structure once it is constructed. In terms of scattering characteristics and spectral efficiency, the measured and simulated are in good agreement.eninfo:eu-repo/semantics/closedAccessUWB antennasMIMO antennasmicrostrip patch antenna5GSlot AntennaWideConference Object10.1109/ICRAMET53537.2021.9650462