Experimental Study of the Evolution of the Breach and the Discharge Through the Breach Resulting From Piping Due To Seepage at the Earth-Fill Dam Top

Abstract

Internal erosion, also known as piping, is one of the most important causes of earth-fill dam breaks. Many researchers dealing with numerical analyses in this area make some simplified assumptions about the shape of the breach and the discharge of water flowing through the breach. This study was conducted in the scope of the project supported financially by the Scientific and Technological Research Council of Turkey and it consists of experimental study which aims to provide data needed to perform numerical analyses with more realistic approaches. A dam with a height of 0.6 m, a bottom width of 2 m and a crest width of 0.20 m was built in a flume 1 m wide, 0.81 m high and 6.14 m long. Before the construction of the dam, some common soil mechanics tests were carried out. The dam was constructed by using a mixture consisting of 85 % sand and 15 % clay. A circular tunnel with a diameter of 2 cm was created along the centerline at 6 cm below the dam crest. In the closed system, water was pumped from the lower reservoir to the upper channel. Six cameras located at different locations recorded the evolution of the dam failure. Gauss Area formula was applied to determine the time-varied of the breach areas at upstream and downstream sides. The discharge of water through the breach and average flow velocity were determined by using the continuity equation. The changes in water depth in the channel were also recorded. © 2022 IAHR.